- Marine-grade aluminum casing3-way discharge port with One 1-1/2″ NPTM, Two – 1″ NPTM
- 1-1/2″ NPTM suction
- Zinc-plated casing bolts
- Mechanical shaft seal
- Nitrile rubber seal and casing “O” rings
- Self-priming up to 19′
- Easy installation
- Compact and lightweight
- High pumping efficiency
- Low oil protection
- Spark arrestor/exhauster diverter
- 60 lbs. (27 kg)
CAFS - Compressed Air Foam system, Darley
UHP-HV® Diesel High Volume pump
Order now, to get Price from us R0,00 Incl. VAT
+ Free ShippingThis dual pump is designed for either a powerhead type unit or a full module. The module provides a “self-contained” diesel powered “slide-in” type ultra high pressure / high volume system (UHP- HV). The system shall be designed to fit into the back of a standard length and width pick-up truck or fire service body. The powerhead is to be installed and plumbed by OEM/installer. The powerhead provides diesel driven volume and pressure pumps. The system is designed to be mounted and finished by installer.
- 65 gpm (246 L/M) @ 48 psi (3.3 bar)
- 50 gpm (189 L/M) @ 81 psi (5.6 bar)
- 20 gpm (76 L/M) @ 120 psi (9.0 bar)
UHP-HV® Diesel High Volume pump
Engine:
The power to drive the system shall be provided by a Kubota model DH 902, liquid cooled, indirect injection, naturally aspirated diesel engine. The heavy duty rating for this engine is 24.8 hp @ 3600 rpm. The power unit shall have re-borable crankcase of grey cast iron. The pressure-lubricated engine shall have a 12VDC – 40 amp alternator along with glow plugs.
High Volume Water Pump
The low pressure water pump shall be a Darley 2BE single-stage centrifugal pump with a vertically split aluminum case. It shall have replaceable bronze impeller and seal rings on a stainless steel shaft. The pump seal shall be of a mechanical design.
Priming System
A Darley 12 VDC electric, oil-less, rotary-vane priming system shall be utilized. The primer is capable of priming the water pump through 20’ of hard suction hose with a 10’ lift.
Module Frame
The module frame shall be constructed of aluminum and designed for rigorous fire service use. Aluminum
tubing shall be ¼” thick and be of 6061 or better specification.
Applications
- Wildland
- Structural firefighting
- Water transfer
- Vehicle Fires
- Mop Up
Dimensions
35″L x 41″W x 26.3″H, 441 lbs. (200 kg)
Spec Sheets
Related products
-
6.5 HP Twin-Impeller Honda Non-Electric Start
Portable Petrol (Gasoline) Powered Pumps Order now, to get Price from us R0,00 Incl. VAT
