Odin® Hornet Compressed Air Foam System Unit

Order now, to get Price from us Incl. VAT

+ Free Shipping

This model provides a “self-contained” gasoline powered “slide-in” type Compressed Air Foam System (CAFS). The CAFS shall be designed to fit into the back of a standard length and width pick-up truck or fire service body. The CAFS shall be designed to discharge water only, air only, foam solution only or compressed air foam from the
same discharge outlet. In addition, the consistency of the compressed air foam (expansion ratio), wet/dry shall be fully adjustable.

Marine-grade aluminum casing3-way discharge port with One 1-1/2″ NPTM, Two – 1″ NPTM
1-1/2″ NPTM suction
Zinc-plated casing bolts
Mechanical shaft seal
Nitrile rubber seal and casing “O” rings
Self-priming up to 19′
Easy installation
Compact and lightweight
High pumping efficiency
Low oil protection
Spark arrestor/exhauster diverter
60 lbs. (27 kg)

65 gpm (246 L/M) @ 48 psi (3.3 bar)
50 gpm (189 L/M) @ 81 psi (5.6 bar)
20 gpm (76 L/M) @ 120 psi (9.0 bar)

Odin® Hornet Compressed Air Foam System Unit

Engine:

Briggs and Stratton Vangaurd, 2 Cylinder, 4 Cycle gasoline fueled, pressure lubricated engine
23 HP at 3600 RPM
Carburetor type fuel system, air cooled with choke operation
16-amp alternator, 12VDC electric start
Dry cartridge, air filter and a muffler

Performance:

WATER PERFORMANCE

140 GPM (530 L/M) @ 110 psi (7.6 bar)
200 GPM (757 L/M) @ 50 psi (3.4 bar)

SIMULTANEOUS FLOW

80 GPM (303 L/M) & 40 CFM @ 100 psi (6.9 bar)

Features:

23HP engine
Darley 2BE pump
Screw Compressor
FF50 foam system
2″ Water Only discharge
1.5″ CAFS discharge
1.5″ Direct Tank Fill
2.5″ Suction/Tank to pump
Exhaust primer

Applications

Wildland
Quick Attack
Rescue
Skid Unit

Dimensions

40″W x 24.5″H x 32″D
450 lbs

Spec Sheets

Odin-Hornet Compressed Air Foam System-Spec

Pump Flyer

Odin® Hornet Flyer

Pump Info:

This model provides a “self-contained” gasoline powered “slide-in” type Compressed Air Foam System (CAFS). The CAFS is designed to fit into the back of a standard length and width pick-up truck or fire service body.

The CAFS is designed to discharge water only, air only, foam solution only or compressed air foam from the same discharge outlet. In addition, the consistency of the compressed air foam (expansion ratio), wet/dry is fully adjustable.