Prima P2 3010 multi-pressure light-alloy pump
Features
- Generates EN1028 rated flows at 2000 LPM at 10 BAR and 250 LPM at 40 BAR
- Multi-pressure design features a centrifugal aluminum low pressure impeller
- Supplied with a ready-to-use mounting platform for ease of installation.
- Most compact pump in its class allowing more room for additional equipment
- Light alloy and gunmetal options to suit pumped water type
- Automatic, twin high efficiency piston primers for quick priming
Specifications for Prima P2 3010 multi-pressure light-alloy pump
| Certification(s) |  |
|---|---|
| Warranty | |
| Weight | 231 lbs |
| Brand | Prima |
| Length | 28 (714) |
| Width | 22,8 (580) |
| Height | 31 (787) |
| Flow (GPM) | 749 gpm |
| Flow (LPM) | 3400 l/min |
| Rated Output LPM | 2000 l/min @ 10 bar |
| Rated Output GPM | 440.5 gpm @ 145 psi |
| Maximum flow – High pressure | 770 l/min |
| Maximum outlet pressure – High Pressure | 54.5 bar |
| Maximum outlet pressure bar | 17 bar |
| Maximum outlet pressure psi | 247 psi |
| Priming time to 7.5m with 100mm suction hose | 22 seconds (4 inch hose) |
| Recommended priming speed | 2500 rpm |
| Maximum recommended priming speed | 3600 rpm |
| NFPA 1906 or EN Rated Capacity | FPN 10-2000 /FPH 40-250 |
| Thermal relief valve action | 42C or 74C (108F to 165F) |
| Impeller material | Hard anodized aluminium alloy |
| Volute material | High strength corrosion resistant aluminium alloy(Gunmetal Optional) |
| Seal type | Mechanical seal |
