HPX350-KBD39 diesel firefighting pump.
Read more about this product here
Hale’s line of diesel-powered slip-on pumps offers the convenience of fuel compatibility with a diesel-powered chassis. They combine all the benefits of a diesel engine — including safety, reliability, long life, and low maintenance. The fuel connections make it easy to use the vehicles diesel tank for increased run time. The suction connection for the HPX350-KBD39 is a 3” female NPT/4” VIC combination. The HPX350-KBD39 diesel firefighting pump is an ideal product for OEM installation. The pump is equipped for remotely connected throttle and stop controls.
TECHNICAL SPECIFICATIONS
- Body and head: High strength cast iron with smooth waterways for maximum performance.
- Impeller: Bronze enclosed type, fully machined and balanced. Bronze impeller has high strength and will not rust or corrode. Smooth waterways increase efficiency.
- Shaft seal: Self-lubricating, self- adjusting mechanical seal for low maintenance and dependability. Easy and economical to maintain
- Drain cock: Brass
- Priming: Complete with 12-volt DC ESP primer, shipped loose
ENGINE
- Kubota 1505 liquid cooled diesel engine
- Four cycle
- 38.9hp @ 3600rpm
- Patented E-TVCS injection system (indirect)
- Radiator, water cooled
- Forced lubrication by trochoid (gear) pump
- 12VDC electric start
- Cast iron cylinder
- Forged steel crankshaft
- Automatic centrifugal speed governor
- Cast iron alloy cylinder head
- Control: Manual
- Dry type air filter with cyclone precleaner
- Emissions: Complies with EPA Tier 4 and E u Stage IIIA Regulations
39hp Kubota Diesel Engine
75 GPM @ 220 PSI • 220 GPM @ 150 PSI • 340 GPM @ 50 PSI
Features and Benefits:
- Diesel Compatibility— Refueling convenience with today’s apparatus
- High Capacity Model — Flows to 340 GPM; Pressures to 220 PSI
- Configured for easy installation by truck builders
- Ideal for pump and roll applications
- Impeller diameter: 5.75”
- Suction: 3” FNPT/4” Victaulic
- Discharge: 2” FNPT/Hale 115 flange (other options available)
- length: 41” (1041 mm)
- Width: 26.5” (673 mm)
- Height: 42.5” (1080 mm)
- Dry weight: 520 lbs (236 kg)
STANDARD FEATURES
- Electric start
- Mounting feet
- Auto compression release
- 12V ESP primer
- 12 Volt 40 amp alternator
- Instrument panel:-Master inlet pressure gauge
-Master discharge pressure gauge
-Engine tachometer gauge
-Red lamp – low oil pressure warning
-yellow lamp – high coolant temperature
-Short lever turn start switch
-Throttle cable
-Mounted PVG priming valve
-(Other options available)
