Description
Prima P2 4010 multi-pressure light alloy pump
Features
- Generates EN1028 rated flows from 2000 LPM to 6000 LPM and 250 LPM at 40 BAR
- Multi-pressure design features a centrifugal aluminum low-pressure impeller and stainless steel high-pressure impeller on a single stainless steel shaft
- Supplied with a ready-to-use mounting platform for ease of installation. The platform incorporates all necessary pump drainage connections and lifting points for forklift use.
- The modular delivery manifold allows for flexibility of installation configurations.
- Most compact pump in its class allowing more room for additional equipment
- Light alloy and gunmetal options to suit pumped water type
- Automatic, twin high-efficiency piston primers for quick priming
- Available with integrated RTP foam system, proportional foam system, and integrated SmartCAFS.
Specifications:
| Certification(s) |  |
|---|---|
| Warranty | |
| Weight | 320 lbs |
| Brand | Prima |
| Length | 32 (806) |
| Width | 30,3 (770) |
| Height | 32,5 (825) |
| Flow (GPM) | 1366 gpm |
| Flow (LPM) | 6200 l/min |
| Rated Output LPM | 4000 l/min @ 10 bar |
| Rated Output GPM | 881 gpm @ 145 psi |
| Maximum flow – High pressure | 772 l/min |
| Maximum outlet pressure – High Pressure | 54.5 bar |
| Maximum outlet pressure bar | 17 bar |
| Maximum outlet pressure psi | 248 psi |
| Priming time to 7.5m with 100mm suction hose | 32 seconds (5.5 inch hose) |
| Recommended priming speed | 2500 rpm |
| Maximum recommended priming speed | 3600 rpm |
| NFPA 1906 or EN Rated Capacity | FPN 10-4000 / FPH 40-250 |
| Thermal relief valve action | 42C or 74C (108F to 165F) |
| Impeller material | Hard anodized aluminium alloy |
| Volute material | High strength corrosion resistant aluminium alloy(Gunmetal Optional) |
| Seal type | Mechanical seal |
Documents
For more Vehicle Mounted Pumps click here
