Description
Prima P1 6010 single pressure light alloy pump
Features:
- Generates EN1028 rated flows from 2000 LPM to 6000 LPM
- Single stage centrifugal design features an aluminum low pressure impeller on a stainless steel shaft
- The modular delivery manifold allows for flexibility of installation configurations.
- Light alloy and gunmetal options to suit pumped water type
- Automatic, twin high efficiency piston primers for quick priming
Read more about this product here
Specifications
| Certification(s) |  |
|---|---|
| Warranty | |
| Weight | 276 lbs |
| Brand | Prima |
| Length | 28 (772) |
| Width | 30 (764) |
| Height | 26 (661) |
| Flow (GPM) | 1366 gpm |
| Flow (LPM) | 6200 l/min |
| Rated Output LPM | 4000 l/min @ 10 bar |
| Rated Output GPM | 881 gpm @ 145 psi |
| Maximum outlet pressure bar | 17 bar |
| Maximum outlet pressure psi | 248 psi |
| Priming time to 7.5m with 100mm suction hose | 32 seconds (5.5 inch hose) |
| Recommended priming speed | 2500 rpm |
| Maximum recommended priming speed | 3600 rpm |
| NFPA 1906 or EN Rated Capacity | FPN 10-4000 |
| Thermal relief valve action | Optional – 42C or 74C (108F to 165F) |
| Impeller material | Hard anodized aluminium alloy |
| Volute material | High strength corrosion resistant aluminium alloy(Gunmetal Optional) |
| Seal type | Mechanical seal |
Documents
| Name | Sheet # | |
|---|---|---|
 |  Prima single pressure light alloy – Specifications – P1A | |
| Prima single pressure light alloy – Specifications – P1B |
Performance Content
| Name | Type |
|---|---|
| Prima Data Sheet | |
For related products click here
Request a quote
Error: Contact form not found.
