Search
    START TYPING AND PRESS ENTER TO SEARCH
    Call Us Email Us Whatsapp Us
    The Scotty Mini Foam Eductor/Mixer Kit
    Scotty mini foam inductor / mixer kit
    Scotty mini foam inductor / mixer kit

    Mini foam inductor / mixer kit

    The Scotty Mini Foam Eductor/Mixer Kit is a device for educting a foam concentrate solution into hose lines of small portable fire pumps, used in combating Forest and Urban/Wildland fires. The S4072-KIT is calibrated for a single pump flow rate of 30gpm (136lt/m). You must match your flow rate to your nozzle for the unit to work properly.

    Manufactured by Scotty Firefighter

    Request a Quote
    Category:

    Description

    • “Through-The-Pump” foam system for smaller portable water pumps.
    • Like the larger 4171, the unit is mounted between the discharge and suction side of a pump.
    • The 4072KIT comes with two 1-½” NP cast aluminum swivel Tee’s.
    • Set for preset eduction ratios of: OFF – .2 – .5 – .7 and 1%.
    • The 4072 is available for flow rates of: 15 GPM (57 LPM), 30 GPM (140 LPM), 50 GPM (225 LPM) and 70 GPM (315 LPM).
    • Please specify GPM rating when ordering.

      4072-15 – 15 GPM Mini Foam Eductor, with pressure & foam pickup hoses
      4072-30 – 30 GPM Mini Foam Eductor, with pressure & foam pickup hoses
      4072-50 – 50 GPM Mini Foam Eductor, with pressure & foam pickup hoses
      4072-70 – 70 GPM Mini Foam Eductor, with pressure & foam pickup hoses
      4072-15KIT – 15 GPM Mini Foam Eductor, with pressure & foam pickup hoses & 2 connection tees
      4072-30KIT – 30 GPM Mini Foam Eductor, with pressure & foam pickup hoses & 2 connection tees
      4072-50KIT – 50 GPM Mini Foam Eductor, with pressure & foam pickup hoses & 2 connection tees
      4072-70KIT – 70 GPM Mini Foam Eductor, with pressure & foam pickup hoses & 2 connection tees

    Related products

    • Variable Percentage Check Valve

      Variable Percentage Check Valve

      Category:

      Designed to fit all Scotty 4060 Eductors Controls the percentage of foam concentrate. Four control positions: OFF, 0.5%, 1% and 3%. Suitable for eduction of Class A and Class B (AFFF) foam concentrates. They can be retrofitted onto Scotty 4060 Eductors. When ordering checkvalves, the flow rate of the eductors must be specified.
    • Scotty 4550 Pillow Tanks

      Pillow tanks

      Category:

      The Scotty 4550 Pillow Tanks are rugged, industrial grade products designed to carry and store water for use at fire scenes and incident sites. They are available in three different capacities of 500 Litres  and 1000 Litre. Made from fabric reinforced materials, the tanks come complete with a 2” NPSH ball valve, removable 5-½” wide cap, fastened corner brackets for tie downs and a Puncture Repair kit.
    • Scotty Medium Expansion Foam Nozzle Attachment

      Medium expansion (mx) foam attachment

      Category:

      The Scotty Medium Expansion Foam Nozzle Attachment generates a thick stream of medium expansion foam for car or tire fires, haz-mat or any situation where a thick and smothering foam blanket is required. Manufactured By Scotty Firefighter
    • Scotty Bravo Backpack System

      Scotty Bravo Backpack System

      Category:

      The Scotty 4000-BRAVO Backpack is designed to be a simple, portable reservoir for water and/or foam concentrate (Class A or class B). It provides the wearer with a safe and comfortable way to carry liquids used during fire operations. The backpack system consists of an outer shell with a removable inner bladder. The outer shell is made in a high-visibility yellow, ballistic nylon fabric and is extremely durable and UV resistant. The BRAVO comes with an ultra-comfortable shoulder harness system. It uses high strength nylon webbing for the fully adjustable shoulder, sternum and waist straps. The high-visibility yellow color allows the Scotty Backpack to stand out through smoke and foliage. Each backpack has a 4" wide filled port with lid and a standard " garden hose thread for an outlet.
      The BRAVO Backpack is pictured with the Scotty 4000 Water Hand Pump and 4062 Pick-Up Hose. To order,
      use complete product code 4000-BRAVO. To order the BRAVO System with a foam hand pump (4000F) use the complete product code 4000F-BRAVO.
    • Scotty Penetrator Nozzle

      Scotty Penetrator nozzle

      Category:

      Scotty Penetrator Nozzle # 4005 The Scotty Penetrator Nozzle is specifically designed with a 1/4” discharge orifice. When connected to the end of a fire hose, it generates a high velocity water jet. The pencil thin water jet penetrates the duff in Wildland fire, extinguishing deep seated fires. When used in conjunction with Class “A” foam this nozzle is an extremely effective tool on duff fires. Comes with 1.5” double female connector. Specify 4005 for NPSH and 4005A for NHT. Manufactured by Scotty Firefighter
    • Scotty ‘Around-The-Pump’ Foam Eductor and Mixer

      Scotty ‘Around-The-Pump’ Foam Eductor and Mixer

      Category:

      The 4071 Foam Eductor/Mixer is a simple "Through the pump" also known as a "Around-The-Pump" unit to educt foam concentrate into hose lines. It is mounted between the discharge and suction side of a pump. Educts foam concentrate into hose lines through a pump's suction and discharge sides. Will educt concentrates at percentages of 0% to 3.75% at flow rates from 15 to 125 GPM at 100 PSI. Maximum operating pressure of 300 PSI.    
    • Scotty Foam Factory

      Scotty Foam Factory

      Category:

      Transforms any pressurized fire hose or water supply line into a foam generating station. A fire crew can arrive at an incident where a quick layer of foam is required, such as a spill or haz-mat situation, attach a supply hose and place the foam where it is needed. The unit can be left unattended to create a blanket of foam over a large area. The system consists of a 1 GPM Scotty Foam Eductor set for either 1% for Class A Foam or 3% for Class B Foam, a Fog Nozzle with Medium Expansion Attachment, a ball shut off with 1 ½" swivel connection mounted on a cap and a pickup assembly for a 22 L pail. The Foam Factory is designed for a nominal operating pressure of between 50 and 150 PSI. Please specify standard NPSH, NH or BSP thread when ordering Manufactured by Scotty Firefighter
    • Scotty Air Aspirating Foam Nozzles

      Scotty Air Aspirating Foam Nozzles

      Category:

      Scotty Air Aspirating Foam Nozzle Scotty Air Aspirating Nozzles are manufactured from the latest engineering grade composite polymers for resilience and durability on the fire scene. They are available in 8 flow rates. All 1-½” Scotty Air Aspirating Nozzle come with a double female connector, 4085 for NPSH or 4086 for NHT.
    0
      0
      Your Cart
      Your cart is emptyReturn to Shop
      Continue Shopping