Description
GODIVA KP midship mounted PTO
Features:
- EN1028 rated performance to 1500 l/min at 10 bar
- Small size allows room for additional equipment
- 5 year maintenance intervals reduces downtime and maintenance costs
- Single piston primer has simple construction for low cost of ownership, with fewer parts
- Fail safe electric primer shutoff ensures primer is not activated at higher speeds, greatly increasing the life of the primer
- Primer seal assembly removed by two bolts so assembly can be maintained at a work bench Identical plumbing can be used on engine and opposite engine rotation pumps
- Three gearbox orientations – Left, right, and down orientations for installation flexibility
- Three volute orientations – Left, right, and vertical orientations for plumbing flexibility
- 1.90:1, 2.33:1, 2.91:1 ratios to suit most engine and PTO applications
- Available in light alloy or gunmetal
Specifications:
| Weight | 114.4 lbs Aluminium, 174 lbs Bronze |
|---|---|
| Brand | KP |
| Length | 19,4 (493) |
| Width | 12 (300) |
| Height | 18 (457) |
| Flow (GPM) | 484.6 gpm |
| Flow (LPM) | 2200 l/min |
| Rated Output LPM | 1500 l/min @ 10 bar – FPN 10-1500 |
| Rated Output GPM | 330.4 gpm @ 145 psi |
| Maximum outlet pressure bar | 17 bar |
| Maximum outlet pressure psi | 248 psi |
| Priming time to 7.5m with 100mm suction hose | 30 seconds (100mm hose) |
| Recommended priming speed | 3000 rpm (impeller) |
| Maximum recommended priming speed | 3000 rpm |
| NFPA 1906 or EN Rated Capacity | FPN 10-750, FPN 10-1000, FPN 10-1500, FPN 15-1000 |
| Thermal relief valve action | 42C or 74C (108F to 165F) |
| Impeller material | Hard anodized aluminium alloy |
| Volute material | High strength corrosion resistant aluminium alloy(Gunmetal Optional) |
| Seal type | Mechanical seal |
| Drive | PTO |
| Pump type | Single Pressure |
