Description
HPX400-KBD24 diesel-powered slip-on pump
Hale’s line of diesel-powered slip-on pumps offers the convenience of fuel compatibility with a diesel-powered chassis. They combine all the benefits of a diesel engine — including safety, reliability, long life, and low maintenance — with power and performance comparable to a gasoline-driven unit.
This Hale X series pump comes complete with a 12- volt electric start ignition system. The fuel connections make it easy to use the vehicle’s diesel tank for increased run time. The suction connection for the HPX400-KBD24 is a 3” female NPT/4” Victaulic. Discharge is a standard 115 flange.
The HPX400-KBD24’s volute and pump head are constructed of a high strength, lightweight anodized aluminum. A bronze impeller, replaceable bronze clearance rings, and a self-adjusting, self-lubricating mechanical seal provide long life and low maintenance operation.
STANDARD FEATURES
- Electric start
- Mounting feet
- 12V ESP Primer
- Single gauge instrument panel
- 12 Volt 40 amp alternator
TECHNICAL SPECIFICATIONS
- Body and Head: black hard coat anodized aluminum with gloss black paint, corrosion resistant with smooth waterways for maximum performance.
- Impeller: Bronze enclosed type, fully machined and balanced, Bronze impeller has high strength and will not rust or corrode. Smooth waterways
increase efficiency. - Shaft Seal: Self-lubricating, self-adjusting mechanical seal for low maintenance and dependability. Easy and economical to maintain.
- Drain Cock: Brass
- Priming: Complete with 12-volt DC ESP primer, shipped loose
ENGINE
- Kubota Super Mini Series D902- E3B
- Emission Regulation: Tier 4
- Type: Vertical, 4-cycle liquid cooled diesel
- Horsepower: 24.8hp @ 3600rpm
- Combustion System: IDI
- Intake System: Naturally Aspirated
- Starting: Electric
- Control: Manual with electric shut-off
- Air Filter: Dry type with cyclone precleaner
24.8hp Kubota Diesel Engine
470 GPM @ 40 PSI • 425 GPM @ 50 PSI
370 GPM @ 60 PSI • 230 GPM @ 80 PSI
1100 LPM @ 5 BAR • 1400 LPM @ 4 Bar
1700 LPM @ 3 BAR
Features and Benefits:
- Diesel Compatibility — Refueling convenience with today’s apparatus
- High Capacity Model — Flows to 500 GPM
- Exclusive Band Clamp Design — Quick and easy access for maintenance and repairs
- Configured for easy installation by truck builders
- Ideal for pump and roll applications
- Tier 4 compliant engine
- Impeller Diameter: 7.25”
- Suction: 3” FNPT, 4” Victaulic
- Discharge: 2.5” FNPT
- length: 32” (813 mm)
- Width: 20” (508 mm)
- Height to top of oil cap: 26” (660 mm)
- Height to tip of muffler: 40”(1016mm)
- Weight: 355 lbs (161 kg)