Call Us Email Us Whatsapp Us

HP75 Series Pumps

The HPX75-B11 and HPT75-B11 portable pumps have been developed especially for the demands of firefighting situations. Higher pressures and lightweight make these pumps ideal for truck mount applications or as a versatile portable pump. The HP75-B11 series comes complete with a 12-volt electric start integral system. The on-board fuel tank provides 1 gallon of fuel with shut-off valve. The suction connection has a 2” FNPT connection and the discharge is a 1.5” FNPT connection for maximum efficiency in OEM or field installation.


HP75 Series Pumps

Manufactured by GODIVA 

Equipment Specification

  • Suction Connection: HPX- 2” Female N PT; HPT- 2” Male N H. Other adapters available
  • Discharge Connection: HPX- 1.5″ Female N PT, HPT- 1.5” Male N H. Other adapters available
  • Body and Volute: A luminum.
  • Impeller: 4.375″ silicon bronze
  • Pump Shaft: Stainless steel
  • Bearing: Ball
  • Priming: USFS style hand primer
  • Maximum Flow: 112 GPM @ 50 PSI
  • Maximum Pressure: 240 PSI (16.5 BAR )


  • Throttle level
  • Master on/off switch
  • Start push-button
  • Choke control
  • Discharge Gauge


  • Make: Briggs & Stratton IntekTM
  • Type: 4-stroke gasoline
  • Horsepower: 11 HP
  • Cooling: Forced A ir
  • Fuel T ank: 1 Gallon (3.8L)
  • Starting: 12 volt electric with recoil backup with voltage regulator
  • Rotation: Counter clockwise from pump side
  • Valves: Cobalite® for long life
  • Cylinder: D uraboreTM cast iron sleeve
  • Governor: Mechanical
  • Ignition: Magnetron® electronic ignition
  • Air Cleaner: Ultra low mount dual element air cleaner
  • Lubrication: L ube power lubrication system with Oil Gard® low oil engine protection system
  • Oil Capacity: 7/8 Quarts (0.8 L iter)

The HPX75-B11 is an ideal product for OEM installation. The pump has a standard engine mounted throttle and choke. The HPT75-B11 is equipped with carrying handles, mounted battery, mounted hand primer, discharge gauge, 1.5” Male N H discharge swivel valve and 2” Male N H pump intake.

Power is provided by the respected Briggs Intek Series 11 HP engine featuring an aluminum cylinder with cast iron sleeve for long life. A Magnetron® electronic ignition along with float free carburetor for quick, dependable starting and R un Sense Oil System to prevent engine failure due to insufficient lubrication are standard features. It has an electric start with recoil backup and 10 A MP altenator to ensure starting under all conditions.
A bronze enclosed impeller, bronze clearance rings and a selfadjusting, self-lubricating mechanical seal provide long life and low maintenance operation.

Product Specifications

HPT7530.3″23.2″21.3″142 lbs
HPX7521.5″18″18.5″105 lbs

Features and Benefits:

• Pressure capabilities up to 240 PSI
• Configured for easy installation by truck builders
• Convenient starting with recoil or push button electric start
• USFS style hand Primer
• Superior Performance — High pump efficiency
• Briggs & Stratton Engine — Gasoline powered, dependable, easy to start
• Compact, lightweight design — High horsepower/ weight ratio
• Meets ISO Class 9 performance rating

    Your Cart
    Your cart is emptyReturn to Shop