Call Us Email Us Whatsapp Us

HP200 11 Series Pumps

B11 Briggs & Stratton Engines

150 GPM @ 25 PSI . 105 GPM @ 50 PSI . 25 GPM @ 100 PSI

The HPX200-B11 and HPT200-B11 portable pumps have been developed especially for the demands of firefighting situations. Pump performance and light weight make these pumps ideal for truck mount applications or as a versatile portable pump

The HP200-B11 series comes complete with a 12-volt electric start integral system. The on-board fuel tank provides 3.2 quarts of fuel with shut-off valve. The HPX200-B11 is an ideal product for OEM installation. The suction connection has a 3” FNPT, 4” VIC combination intake connection and the discharge is a 2.5” FNPT connection for maximum efficiency in OEM or field installation. The pump has a standard engine mounted throttle and choke. The HPT200-B11 is equipped with carrying handles, mounted battery, mounted hand primer, 2.5” Male NH discharge swivel valve, mounted control panel, 2.5” Male NH intake connection.

Power is provided by the respected Briggs Intek Series 15.50 ft. lbs torque engine featuring an aluminum cylinder with cast iron sleeve for long life. A Magnetron® electronic ignition along with float free carburetor for quick, dependable starting and Run Sense Oil System to prevent engine failure due to insufficient lubrication are standard features. It has an electric start with recoil backup and 10 AMP altenator to ensure starting under all conditions. A bronze enclosed impeller, bronze clearance rings and a self-adjusting, self-lubricating mechanical seal provide long life and low maintenance operation.

Every detail and feature of the HP200-B11 series pumps have been carefully designed and built for years of operation.

Product Specifications

Product Length Width Height Weight
HPT200 29 1/2” 23.1/42 ” 20” 129 lbs
HPX200 201/4″ 18″ 20″ 104 lbs

Features and Benefits:

  • Pressure capabilities up to 100 PSI
  • Configured for easy installation by truck builders
  • Convenient starting with recoil or push button electric start
  • USFS style hand Primer
  • Superior Performance — High pump efficiency
  • Briggs & Stratton Engine — Gasoline powered, dependable, easy to start
  • Compact, lightweight design — High horsepower/weight ratio

Description

Equipment
Specifications

  • Suction Connection: 3” Female NPT
  • d ischarge Connection: 2.5” Female NPT
  • Body and Volute: Aluminum.
  • Impeller: 8.75” (222.25 mm) silicon bronze
  • Pump Shaft: Stainless steel
  • Bearing: Ball
  • Priming: USFS style hand primer
  • Maximum Flow: 170 GPM
  • Maximum Pressure: 110 PSI
  • Weight: 135 pounds (61 kg)
  • l ength: 20.5 inches (521 mm)
  • Width: 18 inches (457 mm)
  • Height: 18.5 inches (470 mm)

Instrumentation

  • Throttle level
  • d ischarge Gauge
  • Master On/Off Switch
  • Start Push-Button
  • Choke Control

Engine

  • Make: Briggs & Stratton Intek TM
  • Type: 4-stroke gasoline
  • Horsepower: 11 HP
  • Cooling: Forced Air
  • Fuel Tank: 1 Gallon (3.8 l )
  • Starting: 12 volt electric with recoil backup with voltage regulator
  • Rotation: Counter clockwise from pump side
  • Valves: Cobalite® for long life
  • Cylinder: d urabore TM cast iron sleeve
  • Governor: Mechanical
  • Ignition: Magnetron® electronic ignition
  • Air Cleaner: Ultra low mount dual element air cleaner
  • l ubrication: l ube power lubrication system with Oil Gard® low oil engine protection system • Oil Capacity: 7/8 Quarts (0.8 l iter)