Search
    START TYPING AND PRESS ENTER TO SEARCH
    FoamPro Class A Foam System 1600 Series

    Class A Foam: 1600 Series

    Leading off the FoamPro line, the 1600 series is available in two models, differing only in capacity. Each system includes a Hypro twin plunger pump and DC (12 or 24 volt) motor assembly. Also included is a panel-mounted operator control unit with instructions, flowmeter (1-1/2” or 2”), strainer, foam injection check valve, complete shielded cable set and RFI/EMI suppression kit.

    The system features fully automatic foam proportioning, regardless of changes in flow or pressure, and delivers unmatched accuracy over the entire flow range. It proportions continuously, with no stopping to refill the foam tanks.

    Request a Quote
    Category:

    Description

    NEW – FoamPro Models 1600 & 1601 are now capable of quickly pulling concentrate 3 feet allowing for increased mounting and installation flexibility.

    Other features include:

    • Discharge side injection
    • No in-line restrictions
    • Installs easily in new or existing apparatus
    • Provides the smoothest proportioning available at ultra-low flows
    • Delivers 0.1 to 1.7 gpm (.38 to 6.4 L/min) of concentrate
    • Achieves full pump capacity with all known Class A concentrates
    • 3 feet lift capability
    • Optional:
      • Remote Start/Stop for in-cab control
      • Remote simulated flow switch

    Control module features:

    • Injection percentage from 0.1% to 1.0%
    • On/Off control
    • Foam percentage selector
    • Low concentrate warning indicator
    • Ultra-Bright LED light
    • Advanced environmental protection
    • Simulated flow – auto disengage

    Ideal for use on:

    • Brush rigs/Skid units
    • Fast attack/wildland vehicles
    • Municipal apparatus
    • Compressed Air Foam Systems

    FSG_1600_PERF_SPEC1

    Related Documents

    Related products

    • Class A and/or B Foam: 2024 Series

      Category:

      Equip your apparatus with tomorrow’s technology today! Designed for Class A and / or Class B foam applications, the Model 2024 delivers concentrate from a microscopic 0.1 gpm (0.4 l/m) to 6.34 gpm (24 l/m) – all with unmatched accuracy and simplicity. At the simple push of a button, the FoamPro Model 2024 automatically manages all foam proportioning requirements. Patented micro-processor controls ensure the precise amount of concentrate is injected into the water stream. FoamPro’s discharge side injection delivers exact amount of concentrate regardless of changes in water flow rate, pressure, elevation or nozzle types. Unlike venturi based systems, more water and pressure is available at the nozzle as the flowmeter does not restrict water flow.

    • Class A and/or B Foam: 3012 Series

      Category:

      Extreme Class A and Class B firefighting power is at your fingertips with the FoamPro 3012 proportioner. This versatile system delivers unmatched, supercharged performance with concentrate flow from 0.1 to 12.0 gpm at 0-400 psi, all from a single pump. High-drafting capabilities allow off-board pickup for foam operations or tank refill, which is crucial for high flow situations or when changing concentrates. Unlike other pump designs that may pause in flow during operation, the pump’s triplex plungers are timed to discharge one after the other, delivering smooth, continuous injection. New, hydraulic pump-drive technology produces immediate response from minimum flow to full capacity. The system includes the same industry-proven, ultra-bright LED digital display used on other FoamPro 2000 and 3000 series proportioners.

    • Turbo Stream® Ultra-High Pressure Foam System

      Category:

      Compact and self-contained, the Turbo Stream produces high energy firefighting power with ease and precision. NOW available in PowerPro™ brand or Honda gas engine drives options. Precise high pressure foam solution delivers rapid knockdown. While other systems use inaccurate suction side eductors, the Turbo Stream incorporates a patented foam concentrate injector system. The control module allows the operator to choose injection rates, from 0.3% to 3.0%, with unmatched accuracy, exceeding NFPA 1901 requirements.
    • FoamPro Class A and B Foam 2000 Series

      Class A and/or B Foam: 2000 Series

      Category:

      The 2000 series is available in two models, differing only in capacity. Each system includes a Hypro triplex plunger pump and DC (12 or 24 volt) motor assembly. Also included are a microprocessor control/display unit, instruction placard, strainer, foam injection check valve, complete shielded cable set and RFI/EMI suppression kit. The system provides fully automatic foam proportioning, regardless of changes in flow or pressure, and offers convenient, push-button operation, making it the easiest system to use. LED digital readouts provide real time performance information. The optional advanced feature controller offers “auto-on” programming which automatically arms the proportioner when the fire pump is engaged.