Search
    START TYPING AND PRESS ENTER TO SEARCH
    Call Us Email Us Whatsapp Us
    Class A or B Foam: 2000 Series foam pump

    Class A/B Foam: 2000 Series pump

    The 2000 series is available in two models, differing only in capacity. Each system includes a Hypro triplex plunger pump and DC (12 or 24 volt) motor assembly. Also included are a microprocessor control/display unit, instruction placard, strainer, foam injection check valve, complete shielded cable set and RFI/EMI suppression kit. The system provides fully automatic foam proportioning, regardless of changes in flow or pressure, and offers convenient, push-button operation, making it the easiest system to use.

    Category:

    Description

    The LED digital readouts providing real-time performance information. The optional advanced feature controller offers “auto-on” programming which automatically arms the proportioner when the Fire Fighting Foam system is engaged.

    Other features include:

    • Installs easily in new or existing apparatus
    • No in-line restrictions
    • Delivers unmatched accuracy over the widest range of flows
    • Leading the industry in proven reliability
    • Proportions continuously, with no stopping to refill
    • Discharge side injection
    • Provides the smoothest proportioning available at low flows
    • Delivers 0.01 to 5.0 gpm (0.04 – 18.9 L/min)
    • Achieves full pump capacity with all known Class A, Class B AFFF and most Class B AR-AFFF*

    Control module features:

    • Ultra-bright LED digital readout
    • Injection percentage from 0.1% to 10.0%
    • Displays separate totals for each foam concentrate
    • Low concentrate warning
    • Water flow rate
    • Total water used
    • Percent of foam concentrate
    • Total concentrate used
    • Dual foam capability and calibration

    Options available:

    • Concentrate Management Systems
    • MultiFlo
    • Remote Start/Stop for pump and roll applications
    • Dual-Injection Selector
    • Advanced Feature Controller

    *Note: The FoamPro Fire Fighting Foam system will pump all known Class A and Class B Aqueous Film Forming Foam (AFFF) to capacity. Many brands of Alcohol Resistant-Aqueous Film Forming Foam (AR-AFFF) exhibit higher viscosity characteristics due to chemical composition and polymers. As viscosity increases, diminished flow may affect pump performance. Because of numerous variables including pump design, foam cell configuration, inlet piping/components and system layout; please contact FoamPro for application specific recommendations when foam viscosities of 2000 cps or higher are used.

    For more FoamPro products visit our FoamPro section on our site 

    FSG_2000_PERF_SPEC1

    Related Documents

    Related products

    • Class A/B Foam: 2024 foam pump

      Class A/B Foam: 2024 Series pump

      Category:

      Equip your apparatus with tomorrow’s technology today! Designed for Class A and / or Class B foam applications, the Model 2024 delivers concentrate from a microscopic 0.1 gpm (0.4 l/m) to 6.34 gpm (24 l/m) – all with unmatched accuracy and simplicity. At the simple push of a button, the FoamPro Model 2024 automatically manages all foam proportioning requirements. Patented micro-processor controls ensure the precise amount of concentrate is injected into the water stream. FoamPro’s discharge side injection delivers exact amount of concentrate regardless of changes in water flow rate, pressure, elevation or nozzle types. Unlike venturi based systems, more water and pressure is available at the nozzle as the flowmeter does not restrict water flow.
    • Turbo Stream® Ultra-High Pressure Foam System

      Turbo Stream® Ultra-High Pressure Foam System

      Category:

      Compact and self-contained, the Turbo Stream produces high energy firefighting power with ease and precision. NOW available in PowerPro™ brand or Honda gas engine drives options. Precise high pressure foam stream delivers rapid knockdown. Read more on the products official site
    • Class A and B Foam: 3012 foam pump

      Class A/B Foam: 3012 Series pump

      Category:

      Extreme Class A and Class B firefighting power is at your fingertips with the FoamPro 3012 proportioner. This versatile system delivers unmatched, supercharged performance with concentrate flow from 0.1 to 12.0 gpm at 0-400 psi, all from a single pump. High-drafting capabilities allow off-board pickup for foam operations or tank refill, which is crucial for high flow situations or when changing concentrates.
    • FoamPro Class A Foam Pump System 1600 Series

      Class A Foam: 1600 Series pump

      Category:

      Leading off the FoamPro line, the 1600 series is available in two models, differing only in capacity. Each system includes a Hypro twin plunger pump and DC (12 or 24 volt) motor assembly. Also included is a panel-mounted operator control unit with instructions, flowmeter (1-1/2” or 2”), strainer, foam injection check valve, complete shielded cable set and RFI/EMI suppression kit.