Call Us Email Us Whatsapp Us

Shop

Showing 1–12 of 212 results

  • “Through-the-pump” Foam Eductor and mixer

    Category:

      The 4071 Foam Eductor/Mixer is a simple "Through the pump" also known as a "Around-The-Pump" unit to educt foam concentrate into hose lines. It is mounted between the discharge and suction side of a pump. Educts foam concentrate into hose lines through a pump's suction and discharge sides. Will educt concentrates at percentages of 0% to 3.75% at flow rates from 15 to 125 GPM at 100 PSI. Maximum operating pressure of 300 PSI. For use on portable forestry pumps or fitted permanently to skid units, the 4071 Foam Eductor is a simple and effective way for fire departments to add a foam capability to their equipment. The Scotty Around-the-Pump Foam System is adjustable, permitting various foam ratio percentages to be educted depending on the nozzles being used. A 4171 includes the eductor, pressure hose and pick-up hose. Includes an 18" pressure hose and a 48" foam pickup hose. Use stock code 4171KIT to include one 1 ½"Cast Aluminum Connecting Tee and one 2" Cast Aluminum Connecting Tee.

     
  • “DAMVARK 750lpm & 1000lpm” FLOATING PUMP

    “DAMVARK 750lpm & 1000lpm” FLOATING PUMP

    Categories: ,

    The Floating pump is a fully local manufactured floating pump utilizing a standard Kohler XT775 vertical shaft petrol 4 stroke engine that is fitted with a 2” Hymec trash pump. The engine has a water resistant plastic air filter cover. The fuel consumption is approximate 3lit per hour.
  • 620lt Hi-Pressure Skid Unit PUFFTR22/R210LS/620HR

    Categories: ,

    Our high-pressure fire fighting pumps utilise the Ruby TR22 & TR60 pumps and are powered by petrol or Diesel engines. Our medium units offer a pressure range from 3BAR up to 8BAR and utilise a 620l tank too.
  • Scotty Air Aspirating Nozzles

    Air aspirating foam nozzles

    Category:

    Scotty Air Aspirating Nozzles are manufactured from the latest engineering grade composite polymers for resilience and durability on the fire scene. They are available in 8 flow rates. All 1-½” Scotty Air Aspirating Nozzle come with a double female connector, 4085 for NPSH or 4086 for NHT. The nozzle base is designed with standard 1-½” NPSH male fire hose threads (3/4” Garden Hose Thread for 4003 and 4005). They can be adapted to a 1-½” coupling on a fire hose with either a Forestry 4089 “Quick-Connect” female adaptor or threaded “Stortz” adaptor. Flow Rate: 356Lpm Manufactured By Scotty Firefighter 
  • AirPrime Automatic – Air Powered Pump Primer

    Category:

    AirPrime utilizes air supplied from the chassis air brake system to operate the pump primer. This is proven to be far more efficient and reliable than the conventional electric motor driven primers. It virtually eliminates the impact load on the vehicles electrical system improving the reliability of the vehicle.

  • AirPrime Industrial – Air Powered Pump Primer

    Category:

    AirPrime utilizes air supplied from the chassis air brake system to operate the pump primer. This is proven to be far more efficient and reliable than the conventional electric motor driven primers. It virtually eliminates the impact load on the vehicles electrical system improving the reliability of the vehicle. AirPrime also improves performance in the elapsed time for establishing water supply resulting in improved fireground operations and safety.

  • AirPrime Manual – Air Powered Pump Primer

    Category:

    AirPrime utilizes air supplied from the chassis air brake system to operate the pump primer. This is proven to be far more efficient and reliable than the conventional electric motor driven primers. It virtually eliminates the impact load on the vehicles electrical system improving the reliability of the vehicle. AirPrime also improves performance in the elapsed time for establishing water supply resulting in improved fire ground operations and safety.

  • Anco 1 Inch Large Hose Reel

    Anco 1 Inch Large Hose Reel

    Categories: ,

    Large Hose Reel with manual rewind handle and 25mm rotating coupling. Bolt down. Dimensions = 530mm High x 700mm wide x 730mm Deep. Mild Steel, painted. 1 inch rotating coupling. Excluding Hose, and mounting bolts. Manufactured by Anco 
  • Anco New Generation Large Hose Reel

    Categories: ,

    Mild Steel hose reel with manual rewind handle and 25mm rotating coupling. Bolt down. Fair-Lead roller guides standard. Dimensions = 630mm High x 800mm Wide x730mm Deep. Mounts onto the fire truck.
  • Anco New Generation Medium Hose Reel

    Categories: ,

    Mild Steel hose reel with manual rewind handle and 25mm rotating coupling. Bolt down. Fair-Lead roller guides standard. Dimensions = 630mm High x 720mm Wide x 860mm Deep.
  • ARK – Inflatable Tent – GEODESIC DESIGN

    Category:

    This design leverages on the benefits of our standard 5m x 5m geodesic tent design (sturdy, self-erecting, manageable size and weight for transporting and erecting), however we have designed vertical sides, so there is significantly more space utilisation inside the tent. The generic design module, allows the tent to be used as complete standalone, or to be connected with other tent modules in any linear, L-shape, U-shape configuration. Because all sides are identical, ‘plugging’ tents together is easier, and also more secure and waterproof (an external cover flap with industrial zip above the 2.5m door flaps provides an integrated joining of the tents). Sizes: 3m x 3m or 5m x 5m
  • ARK – Inflatable Tent – MODULO DESIGN

    Category:

    This design leverages on the benefits of our standard 5m x 5m geodesic tent design (sturdy, self-erecting, manageable size and weight for transporting and erecting), however we have designed vertical sides, so there is significantly more space utilization inside the tent. The generic design module, allows the tent to be used as complete standalone, or to be connected with other tent modules in any linear, L-shape, U-shape configuration.