Our Product Categories
ARK – Inflatable Tent – GEODESIC DESIGN
Category: ARK - Inflatable Tent
This design leverages on the benefits of our standard 5m x 5m geodesic tent design (sturdy, self-erecting, manageable size and weight for transporting and erecting), however we have designed vertical sides, so there is significantly more space utilisation inside the tent. The generic design module, allows the tent to be used as complete standalone, or to be connected with other tent modules in any linear, L-shape, U-shape configuration. Because all sides are identical, ‘plugging’ tents together is easier, and also more secure and waterproof (an external cover flap with industrial zip above the 2.5m door flaps provides an integrated joining of the tents). Sizes: 3m x 3m or 5m x 5mARK – Inflatable Tent – MODULO DESIGN
Category: ARK - Inflatable Tent
This design leverages on the benefits of our standard 5m x 5m geodesic tent design (sturdy, self-erecting, manageable size and weight for transporting and erecting), however we have designed vertical sides, so there is significantly more space utilization inside the tent. The generic design module, allows the tent to be used as complete standalone, or to be connected with other tent modules in any linear, L-shape, U-shape configuration.
ATP Foam Flurry™ economical proportioner
Category: Inductors and Other
The ATP FOAM FLURRY™ is our most economical proportioner. It is simple-to-install and operate, and works without 12v power – no amperage issues for small pumps. For your next Darley portable pump purchase, or for retrofitting your current pump, the ATP FOAM FLURRY™ will deliver foam cost effectively.- All brass construction - no plastic
- Fast adjusting variable control ball valve
- Capable of .5% injection rate up to 130 gpm
Odin® Cobra 200-100 CAFS Unit
Categories: CAFS - Compressed Air Foam system, Darley
The compressed air foam system shall be a high-output, engine-driven, module-type design. It shall include all of the following necessary components built into a compact frame assembly. The CAFS shall be designed to discharge water only, air only, foam solution only or compressed air foam from the same discharge outlet. In addition, the consistency of the compressed air foam (expansion ratio), wet/dry shall be fully adjustable.Odin® Darley Autovalve™ programmable valve system
Category: Inductors and Other
The Autovalve™ is a user programmable valve system to be used in Compressed Air Foam systems, powered by 12 volt or 24 volt battery power. The Autovalve™ will have predetermined flow settings for a water and air valve by operation of the flow buttons. The system shall operate several modes of flow choices:- AIR ONLY
- DRY C.A.F.
- WET C.A.F.
- H2O (Water Only)
Odin® Darley Fast Foam 250 Foam Proportioner
Category: Inductors and Other
Class “A” Foam Proportioner. The Fast Foam system offers a reliable, accurate, compact foam proportioning system at an economical price. This model treats up to 250 gpm @ 1% at pressures up to 175 psi.Odin® Darley Fast Foam 50 Foam Proportioner
Category: Inductors and Other
Class “A” Foam Proportioner. The Fast Foam system offers a reliable, accurate, compact foam proportioning system at an economical price. This model treats up to 50 gpm @ 1% at pressures up to 175 psi.Odin® Derringer 100-50 CAFS Unit
Categories: CAFS - Compressed Air Foam system, Darley
The Derringer provides a self-contained, diesel-powered, “slide-in” type compressed air foam system (CAFS) unit. The CAFS unit shall be designed to fit into the back of a standard length and width pick-up truck body. The CAFS shall be designed to discharge water only, air only, foam solution only or compressed air foam from the same discharge outlet. In addition, the consistency of the compressed air foam (expansion ratio), wet/dry shall be fully adjustable.Odin® Diesel Mongoose 46/23 CAFS Unit
Categories: CAFS - Compressed Air Foam system, Darley
This model provides a “self-contained” diesel powered “slide-in” type Compressed Air Foam System (CAFS). The CAFS shall be designed to fit into the back of a standard length and width pick-up truck or fire service body. The CAFS shall be designed to discharge water only, air only, foam solution only or compressed air foam from the same discharge outlet. In addition, the consistency of the compressed air foam (expansion ratio), wet/dry shall be fully adjustable.Odin® Hornet Compressed Air Foam System Unit
Categories: CAFS - Compressed Air Foam system, Darley
This model provides a “self-contained” gasoline powered “slide-in” type Compressed Air Foam System (CAFS). The CAFS shall be designed to fit into the back of a standard length and width pick-up truck or fire service body. The CAFS shall be designed to discharge water only, air only, foam solution only or compressed air foam from the same discharge outlet. In addition, the consistency of the compressed air foam (expansion ratio), wet/dry shall be fully adjustable.Odin® Kubota Mustang 100-50 CAFS Unit
Categories: CAFS - Compressed Air Foam system, Darley
The Mustang provides a self-contained, diesel-powered, “slide-in” type compressed air foam system (CAFS) unit. The CAFS unit shall be designed to fit into the back of a standard length and width pick-up truck body. The CAFS shall be designed to discharge water only, air only, foam solution only or compressed air foam from the same discharge outlet. In addition, the consistency of the compressed air foam (expansion ratio), wet/dry shall be fully adjustable.Odin® Mongoose 31HP Gas 46-23 air foam system
Categories: CAFS - Compressed Air Foam system, Darley
This model provides a “self-contained” gasoline powered “slide-in” type Compressed Air Foam System (CAFS). The CAFS shall be designed to fit into the back of a standard length and width pick-up truck or fire service body. The CAFS shall be designed to discharge water only, air only, foam solution only or compressed air foam from the same discharge outlet. In addition, the consistency of the compressed air foam (expansion ratio), wet/dry shall be fully adjustable. Manufactured by ODINOdin® Weapon 200-100 CAFS Unit
Categories: CAFS - Compressed Air Foam system, Darley
This model provides a “self-contained” diesel powered “slide-in” type Compressed Air Foam System (CAFS). The CAFS shall be designed to fit into the back of a standard length and width pick-up truck or fire service body. The CAFS is be designed to discharge water only, air only, foam solution only or compressed air foam from the same discharge outlet. In addition, the consistency of the compressed air foam (expansion ratio), wet/dry will be fully adjustable.UHP-HV® Diesel High Volume pump
Categories: CAFS - Compressed Air Foam system, Darley
This dual pump is designed for either a powerhead type unit or a full module. The module provides a “self-contained” diesel powered “slide-in” type ultra high pressure / high volume system (UHP- HV). The system shall be designed to fit into the back of a standard length and width pick-up truck or fire service body. The powerhead is to be installed and plumbed by OEM/installer. The powerhead provides diesel driven volume and pressure pumps. The system is designed to be mounted and finished by installer. Manufactured by ODIN
“DAMVARK 750lpm & 1000lpm” FLOATING PUMP
Categories: Fire24Seven, Floating Pump
The Floating pump is a fully local manufactured floating pump utilizing a standard Kohler XT775 vertical shaft petrol 4 stroke engine that is fitted with a 2” Hymec trash pump. The engine has a water resistant plastic air filter cover. The fuel consumption is approximate 3lit per hour.620lt Hi-Pressure Skid Unit PUFFTR22/R210LS/620HR
Categories: Fire24Seven, Skid Unit
Our high-pressure fire fighting pumps utilise the Ruby TR22 & TR60 pumps and are powered by petrol or Diesel engines. Our medium units offer a pressure range from 3BAR up to 8BAR and utilise a 620l tank too.Anco 1 Inch Large Hose Reel
Categories: Fire24Seven, Hose Reels
Large Hose Reel with manual rewind handle and 25mm rotating coupling. Bolt down. Dimensions = 530mm High x 700mm wide x 730mm Deep. Mild Steel, painted. 1 inch rotating coupling. Excluding Hose, and mounting bolts. Manufactured by AncoAnco New Generation Large Hose Reel
Categories: Fire24Seven, Hose Reels
Mild Steel hose reel with manual rewind handle and 25mm rotating coupling. Bolt down. Fair-Lead roller guides standard. Dimensions = 630mm High x 800mm Wide x730mm Deep. Mounts onto the fire truck.Anco New Generation Medium Hose Reel
Categories: Fire24Seven, Hose Reels
Mild Steel hose reel with manual rewind handle and 25mm rotating coupling. Bolt down. Fair-Lead roller guides standard. Dimensions = 630mm High x 720mm Wide x 860mm Deep.Door Breaching Battering Ram Forced Entry Tool
Categories: Battering Ram, Fire24Seven, Tactical Tools
With two front handles. The kinetic energy is greatly increased to 20,000 lbs. Two person style (shown) is designed as a two-person ram which may be used by one strong person long.Fire Beater
Categories: Fire Beater & Rake, Fire24Seven
Fire beaters are used to effectively control and/or extinguish wildfires in open areas such as grasslands. The wood and aluminium handle options allow a beating operation to happen at a distance. The industrial grade rubber beater allows for the firefighter to smother the flames and halt the fire. Handle length 1400mm. Beater dimensions 310mm x 450mm.Fire Beater – 1.6M Wood / Aluminium handle
Categories: Fire Beater & Rake, Fire24Seven
Fire beaters can be used to effectively put out general fires in open areas such as grass fires etc. The industrial grade rubber acts as a beater to knock out the flames and halt the fire.Fire Fighters kit bag
Categories: Fire24Seven, Kit Bag
Fire Fighters kit bag... the hard wearing, heavy duty bag, perfect for storage and carrying.Halligan Pry Tools ML803
Categories: Fire24Seven, Halligan Pry Tools, Tactical Tools
Made with a durable black tactical finish, these heavy-duty Hooligan tools are designed to pry, pound, twist, and cut open or remove all types of barriers.Halligan Pry Tools ML804
Categories: Fire24Seven, Halligan Pry Tools, Tactical Tools
Halligan bar is a useful multipurpose tool ideal for pulling, prying, striking, punching or twisting during overhaul or for forcible entry applications. The Halligan bar tool meets ANSI specification for hardness and comes in the 24- and 36-inch length variants. This Halligan bar is manufactured from high-carbon, heat treated steel for extended durability and comes with zinc plating for corrosion resistance.Halligan Pry Tools ML805
Categories: Fire24Seven, Halligan Pry Tools, Tactical Tools
Made with a durable black tactical finish, these heavy-duty Hooligan tools are designed to pry, pound, twist, and cut open or remove all types of barriers.
GODIVA GV10000 Single pressure vehicle pump
Categories: Godiva, Vehicle Mounted Pumps
Single pressure vehicle mounted pump. Maximum flow rated at 10000l/min and maximum pressure discharge of 24bar. Within a compact envelope the pumps features an automatic water ring primer, self-adjusting mechanical seal on a stainless steel shaft directly coupled to the pump drive flange. Options available include light alloy or gunmetal versions, piston priming system and a range of suction and discharge configurations. Manufactured by GODIVAGODIVA GV5410 Single pressure vehicle pump
Categories: Godiva, Vehicle Mounted Pumps
Single pressure vehicle mounted pump. Maximum flow rated at 5800l/min and maximum pressure discharge of 22bar. Within a compact envelope the pumps features an automatic water ring primer, self-adjusting mechanical seal on a stainless steel shaft directly coupled to the pump drive flange. Options available include light alloy or gunmetal versions, piston priming system and a range of suction and discharge configurations.GODIVA GV6500 Single pressure vehicle pump
Categories: Godiva, Vehicle Mounted Pumps
Single pressure vehicle mounted pump. Maximum flow rated at 7500l/min and maximum pressure discharge of 22bar. Within a compact envelope the pumps features an automatic water ring primer, self-adjusting mechanical seal on a stainless steel shaft directly coupled to the pump drive flange. Options available include light alloy or gunmetal versions, piston priming system and a range of suction and discharge configurations.GODIVA KP 4136 PTO driven centrifugal fire pumps
Categories: Godiva, Vehicle Mounted Pumps
The Godiva KP series of rear or midship mounted PTO driven centrifugal fire pumps offers the ultimate in unrivalled performance up to 1500 LPM because only the KP offers both a single-pressure and a multi-pressure option, reduced whole life cost of ownership, is easily installed and maintained all in the smallest, lightest package in the market. Bronze option available.GODIVA KP midship mounted PTO
Categories: Godiva, Vehicle Mounted Pumps
The Godiva KP series of rear or midship mounted PTO driven centrifugal fire pumps offers the ultimate in unrivalled performance up to 1500 LPM because only the KP offers both a single-pressure and a multi-pressure option, reduced whole life cost of ownership, is easily installed and maintained all in the smallest, lightest package in the market. Bronze option available. Manufactured by GODIVAGODIVA Powerflow 8/5 Single Discharge pump
Categories: Godiva, Portable Pumps
The GODIVA Powerflow 8/5 Single Discharge is a compact and lightweight portable fire pump with a rated performance of 800l/min at 5 bar of pressure with a 3 metre lift. Powered by 18HP Briggs and Stratton engine, this pump uses a single discharge valve and is available with exhaust priming system, electric or manual starting. Manufactured by GODIVAGODIVA PowerFlow 8/5 Twin Discharge
Categories: Godiva, Portable Pumps
The PowerFlow 8/5 Twin is a compact and lightweight portable fire pump with a rated performance of 800l/min at 5 bar of pressure with a 3 metre lift. Powered by 18HP Briggs and Stratton engine, this pump uses twin discharge valves and is available with exhaust priming system, electric or manual starting. Manufactured by GODIVAGODIVA PowerFlow HPX200-B18 portable fire water pump
Categories: Godiva, Portable Pumps
The integrated X-Stream series pump is the newest, most exciting development in slip-on pumps in years. The Hale HPX200 B18 features innovative additions that have been engineered to provide unparalleled performance and ease of operation. The configuration of this portable fire water pump is ideal for mounting on any piece of equipment. The pumping unit is attached to a steel skid plate base that can be easily mounted into any vehicle. Manufactured by GODIVAGODIVA PowerFlow HPX200-KBD24 Diesel Pump
Categories: Godiva, Portable Pumps
You want flexibility and performance. High quality is your minimum standard. That's why the Hale Attack Firefighting pump range are designed to be tough and perform well at higher or lower pressures. Hale has over 100 years' experience making fire pumps so you can be sure your Hale pump will deliver performance when you need it. Manufactured By GODIVAGODIVA PowerFlow HPX75-B18 high pressure pump
Categories: Godiva, Portable Pumps
You deserve fire pumps that you can depend on, first time, every time. That's why the Hale high pressure pump range are designed to be tough and dependable performers. Hale has over 100 years' experience making fire pumps so you can be sure your Hale pump will deliver performance when you need it. Manufactured by GODIVAGODIVA Prima P2 4010 multi-pressure light alloy pump
Categories: Godiva, Vehicle Mounted Pumps
Godiva's Prima P2 multi-pressure light alloy pump is designed for midship and rear mounted pumps. Designed utilizing enhanced material selection ensures long life and reliability. Incorporated features aide in maintenance and reduce whole life costs. Manufactured by GODIVAGodiva Prima P2 6010 multi-pressure pump
Categories: Godiva, Vehicle Mounted Pumps
Godiva's Prima P2 multi-pressure light alloy pump is designed for midship and rear mounted pumps. Designed utilizing enhanced material selection ensures long life and reliability. Incorporated features aide in maintenance and reduce whole life costs.
Class1 Pro-Kit
Categories: Hale, High Pressure / Low Volume, HP - Portable
The Hale/Class1 Pro-Kit™ program is designed to provide the professional fire-rescue vehicle manufacturer with an advanced method of configuring, ordering, and installing Hale/Class1’s state-of- the-art portable pumps.Fyr Flote
Categories: Hale, Hale2, High Pressure / Low Volume, HP - Portable
Portable Floating Pump
The Fyr Flote is a lightweight, portable centrifugal fire fighting pump mounted on an unsinkable, high-strength polyethylene float.Fyr Pak-E portable centrifugal pump
Categories: Hale, Hale2, High Pressure / Low Volume, HP - Portable
The Fyr Pak-E is a lightweight portable centrifugal pump mounted on a padded adjustable backpack frame. Weighing only 44 pounds, the Fyr Pak-E can pump water from draft, relay or hydrant. It can go where a fire engine can’t reach. It will deliver discharge pressures up to 220 PSI (15.5 bar) and flows to 75 GPM (285 LPM) from draft. The unit includes an electric starting system, battery charging system, battery, recoil starter, spark arresting muffler, an engine overspeed control switch, a priming pump, and a priming valve.GODIVA Fyr Pak
Categories: Hale, High Pressure / Low Volume, HP - Portable
Portable Backpack Pump
The Fyr Pak is a lightweight portable centrifugal pump mounted on a padded adjustable backpack frame. Weighing only 34 pounds, the Fyr Pak can pump water from draft, relay or hydrant. It will deliver discharge pressures up to 220 PSI(15.5 bar) and flows to 75 GPM (285 LPM) from draft. The unit includes an automatic recoil starter, a spark resisting muffler, an engine overspeed control switch, a priming pump, and a priming valve. Manufactured by GODIVAHALE Super Chief floating pump
Categories: Hale, Portable Pumps
Hale's Super Chief has a unique design specially engineered for the fire service. The pump and engine assembly detach easily from the float. The float folds in half for convenient storage in most apparatus compartments. The Super Chief is the pump to count on when you cannot count on hydrants. It is easily used with alternative water sources such as streams, lakes, ponds, or pools. The Super Chief requires only three inches of water to draft. Manufactured by HALEHP200 11 Series Pumps
Categories: 200 Series, Hale, Medium Pressure / Medium Volume
B11 Briggs & Stratton Engines
150 GPM @ 25 PSI . 105 GPM @ 50 PSI . 25 GPM @ 100 PSI The HPX200-B11 and HPT200-B11 portable pumps have been developed especially for the demands of firefighting situations. Pump performance and light weight make these pumps ideal for truck mount applications or as a versatile portable pump The HP200-B11 series comes complete with a 12-volt electric start integral system. The on-board fuel tank provides 3.2 quarts of fuel with shut-off valve. The HPX200-B11 is an ideal product for OEM installation. The suction connection has a 3” FNPT, 4” VIC combination intake connection and the discharge is a 2.5” FNPT connection for maximum efficiency in OEM or field installation. The pump has a standard engine mounted throttle and choke. The HPT200-B11 is equipped with carrying handles, mounted battery, mounted hand primer, 2.5” Male NH discharge swivel valve, mounted control panel, 2.5” Male NH intake connection. Power is provided by the respected Briggs Intek Series 15.50 ft. lbs torque engine featuring an aluminum cylinder with cast iron sleeve for long life. A Magnetron® electronic ignition along with float free carburetor for quick, dependable starting and Run Sense Oil System to prevent engine failure due to insufficient lubrication are standard features. It has an electric start with recoil backup and 10 AMP altenator to ensure starting under all conditions. A bronze enclosed impeller, bronze clearance rings and a self-adjusting, self-lubricating mechanical seal provide long life and low maintenance operation. Every detail and feature of the HP200-B11 series pumps have been carefully designed and built for years of operation.Product Specifications
Product Length Width Height Weight HPT200 29 1/2” 23.1/42 ” 20” 129 lbs HPX200 201/4" 18" 20" 104 lbs Features and Benefits:
- Pressure capabilities up to 100 PSI
- Configured for easy installation by truck builders
- Convenient starting with recoil or push button electric start
- USFS style hand Primer
- Superior Performance — High pump efficiency
- Briggs & Stratton Engine — Gasoline powered, dependable, easy to start
- Compact, lightweight design — High horsepower/weight ratio
HP200 YD9 DIESEL FIRE FIGHTING PUMP
Categories: 200 Series, Hale, Medium Pressure / Medium Volume
The HPX200-YD9 diesel fire fighting pump is an ideal product for forestry or high pressure applications. It is provided with a Hale Guzzler Hand Primer that easily primes the pump in 4 to 8 strokes for most applications. The pump is equipped for remotely connected throttle and stop controls.HP275 Attack Max
Categories: 275 Series, Hale, Hale2, Medium Pressure / Medium Volume
The Attack Max is a twin handline capable pump. It is conveniently designed for easy installation by truck builders. Power is provided by the respected Briggs and Stratton Vanguard engine.HP300 Series Pumps
Categories: 300 Series, Hale, Medium Pressure / Medium Volume
HP300 Series pumps come in a number of variations to suit your needs and situation. Designed for easy installation by truck builders.HP400-B18 Series pump
Categories: 400 Series, Hale, Low Pressure / High Volume
The HP400 Series is a low pressure, high volume portable pump. The pump body and head are coupled together with a stainless steel bank clamp which allows for quick pump removal for servicing.HP400-B18 Series Pumps
Categories: 400 Series, Hale, Low Pressure / High Volume
The HP400 Series is a low pressure, high volume portable pump. The pump body and head are coupled together with a stainless steel bank clamp which allows for quick pump removal for servicing.HP450 Attack Max twin handline capable pump
Categories: 400 Series, Hale, Low Pressure / High Volume
The HP450 Attack Max twin handline capable pump is a twin handline capable pump. Conveniently designed for easy installation.
“Through-the-pump” Foam Eductor and mixer
Category: Scotty Firefighter
The 4071 Foam Eductor/Mixer is a simple "Through the pump" also known as a "Around-The-Pump" unit to educt foam concentrate into hose lines. It is mounted between the discharge and suction side of a pump. Educts foam concentrate into hose lines through a pump's suction and discharge sides. Will educt concentrates at percentages of 0% to 3.75% at flow rates from 15 to 125 GPM at 100 PSI. Maximum operating pressure of 300 PSI. For use on portable forestry pumps or fitted permanently to skid units, the 4071 Foam Eductor is a simple and effective way for fire departments to add a foam capability to their equipment. The Scotty Around-the-Pump Foam System is adjustable, permitting various foam ratio percentages to be educted depending on the nozzles being used. A 4171 includes the eductor, pressure hose and pick-up hose. Includes an 18" pressure hose and a 48" foam pickup hose. Use stock code 4171KIT to include one 1 ½"Cast Aluminum Connecting Tee and one 2" Cast Aluminum Connecting Tee.Backpack fill station
Category: Scotty Firefighter
The Scotty fill station provides a quick and easy method to refill water-carrying backpacks. All components of the system are made from glass-filled nylon or PVC and are impervious to corrosion. For connection to NHT pump outlets and hoses, order 4002FILL-NHT. For connection to NPSH pump outlets, order 4002FILL-NPSH. Manufactured by Scotty FirefighterFire gel applicator kits
Category: Scotty Firefighter
Scotty fire gel alters the way wildfires burn, decreasing fire intensity and slowing the advance of the fire, even after the water in the fire retardant has evaporated. Applicators for all brands of aqueous fire fighting Gels, like Barricade, Phos-Chek, Thermo-Gel and No-Char. Scotty makes the most economical, effective and easy to use Gel Delivery Systems available today. Fire Gel concentrates consist of super absorbent polymers that absorb and grow to hundreds, even thousands of times their size when exposed to water. The polymers, with all that extra water, provide an excellent thermal barrier against fire. The clinging properties of Fire Gel enable it to be applied precisely where it is needed. Fire Gels can be applied to metal, glass, stucco and wood. When properly applied, Fire Gels will remain hydrated and effective for many hours. Manufactured by Scotty FirefighterFoam applicator kit with variable percentage
Category: Scotty Firefighter
The Scotty 6 L Foam Kit is designed for attachment to a 1 ½" fire hose. The unit provides a fast and simple solution to a fire scene requiring Class A or Class B (AFFF) foam. It has the capability of turning off the foam or selecting 5%. 1% or up to 3% if Class B foam is required. The Foam Kit has application in many environments; Fire Departments, Industrial Facilities, Storage Facilities, Marinas, etc. The body of the unit is molded from glass reinforced nylon for strength and durability. It is also resistant to corrosion caused by sea water and foam concentrates, electrolysis and UV radiation. Available in flow rates of 15, 30, 50 or 75 gpm for hose 1 ½" lines. Manufactured by Scotty FirefighterFoam eductor backpack systems
Category: Scotty Firefighter
- With portable foam systems, every fire hose line becomes a foam line. For versatility and flexibility, Scotty has four different flow rates. All units include:
- Backpack with 5 gallon capacity.
- Foam pickup hose with shut off valve Quick Connector
- Air aspirating or fog/straight stream Nozzle with matching Foam Eductor.
- D-Handle shut off with Pistol Grip ball shut off, 1 1⁄2” NPSH, NHT or BSP threads.
- With portable foam systems, every fire hose line becomes a foam line. For versatility and flexibility, Scotty has four different flow rates. All units include:
Fog/straight stream nozzle
Category: Scotty Firefighter
Scotty’s New Fog/Straight-Stream Nozzle is a durable, light weight, maintenance free adjustable nozzle. It creates a perfect, wide, fine mist in fog mode and has excellent reach of stream, 80’ at 100 PSI in straight mode. It is available in a High-Flow (50 GPM to 100 GPM) and a Low-Flow (15-50 GPM) model. Nozzle shuts off past straight stream. Both flow rates are available in 1.5” NP, NHT, or BSP female threads. This Nozzle can be used with Foam or Gel products. Nozzle shuts off past straight stream. The 4035 cannot be shut off independantly while the 4038 has a twist to shutoff capability. Manufactured By Scotty FirefighterFog/straight stream nozzle with d-handle pistol grip shut-offs
Category: Scotty Firefighter
The Scotty #4037 High-Flow Nozzle with D handle shutoff is manufactured From glass-reinforced, engineering grade nylon; this lightweight unit is extremely durable and is not susceptible to corrosion. Designed for flexibility, the nozzle tip can be detached so a Scotty 4060 Foam Eductor can be installed between the nozzle and shut-off. Capable of producing both a wide or fine mist and excellent reach of stream in straight mode. Also available in low-flow (15-30gpm). Manufactured By Scotty FirefighterForestry Foam Hand Pump & Alpha Backpack
Category: Scotty Firefighter
The Scotty 4000BP backpack sprayer system is ideal for rural and remote firefighting operations. The SBP is supplied with a water handpump and nozzle however it can be ordered with an OPTIONAL foam specific hand pump which includes an incorporated foam reservoir and aeration type foam nozzle. Manufactured by Scotty FirefighterMedium expansion (mx) foam attachment
Category: Scotty Firefighter
The Scotty Medium Expansion Foam Nozzle Attachment generates a thick stream of medium expansion foam for car or tire fires, haz-mat or any situation where a thick and smothering foam blanket is required. Manufactured By Scotty FirefighterMini foam inductor / mixer kit
Category: Scotty Firefighter
The Scotty Mini Foam Eductor/Mixer Kit is a device for educting a foam concentrate solution into hose lines of small portable fire pumps, used in combating Forest and Urban/Wildland fires. The S4072-KIT is calibrated for a single pump flow rate of 30gpm (136lt/m). You must match your flow rate to your nozzle for the unit to work properly. Manufactured by Scotty FirefighterMini monitor systems
Category: Scotty Firefighter
The Scotty 4048 is a “Mini Monitor" system that can be temporarily or permanently mounted virtually anywhere. The system consists of a mount (can be top or side mounted), a 10” high Swivel Post and Tube Bracket, a 4080 Pistol Grip Shut-Off and either a Foam Tube Nozzle, a Fog/stream Nozzle or Smooth Bore Nozzle. The unit will swivel 360º and tilt up 75º and down 80º from the horizontal. The unit can be locked in one of seven different angles by tightening the included lock knob. Product CatalogueMini pincher dual pattern nozzle
Category: Scotty Firefighter
When mounted on our 4000 Hand Pump, the Scotty® 4007 "Mini Pincher" Nozzle is a flexible tipped nozzle that the user can simply squeeze between their fingers to change the spray pattern from a straight stream to a fan pattern. The "Mini Pincher" is made from a durable PVC material, making it very flexible and easy to pinch with your fingers. This strong PVC material will always retain its original tube shape. Scotty Firefighter 4007 Mini Pincher Dual Pattern Nozzle in action
Hi Lift First Responder Jack
Category: Hi Lift First Responder Jack
The First Responder Jack is the tool of choice for Extrication, Heavy Rescue, Forcible Entry, RIT/RIC, procedures as well as Stabilization and Shoring. Firefighter-designed, the First Responder Jack is constructed of steel, cast iron, and high-strength aluminium, and available in 36", 48", and 60" sizes. It offers up to 4660 lb. of leveraging, lifting, and winching options. No other rescue tool is as easy to use, dependable, visible, and versatile; giving it unlimited potential at a fraction of the cost of other expensive rescue tools.
AirPrime Automatic – Air Powered Pump Primer
Category: Trident
AirPrime utilizes air supplied from the chassis air brake system to operate the pump primer. This is proven to be far more efficient and reliable than the conventional electric motor driven primers. It virtually eliminates the impact load on the vehicles electrical system improving the reliability of the vehicle.
AirPrime Industrial – Air Powered Pump Primer
Category: Trident
AirPrime utilizes air supplied from the chassis air brake system to operate the pump primer. This is proven to be far more efficient and reliable than the conventional electric motor driven primers. It virtually eliminates the impact load on the vehicles electrical system improving the reliability of the vehicle. AirPrime also improves performance in the elapsed time for establishing water supply resulting in improved fireground operations and safety.
AirPrime Manual – Air Powered Pump Primer
Category: Trident
AirPrime utilizes air supplied from the chassis air brake system to operate the pump primer. This is proven to be far more efficient and reliable than the conventional electric motor driven primers. It virtually eliminates the impact load on the vehicles electrical system improving the reliability of the vehicle. AirPrime also improves performance in the elapsed time for establishing water supply resulting in improved fire ground operations and safety.
Trident Foamate #1.0 Class A Foam System
Category: Trident
Trident’s FOAMATE 1.0 is an around-the-pump foam proportioning system that is easy to install and operate, providing Class A foam capabilities to any fire apparatus. A venturi device type system that educts foam concentrate from either the on-board foam tank or external sources, sending foam solution to all discharge outlets simultaneously. The FOAMATE 1.0 system can provide proportioning at .25%, .50%, or 1% injection rates. It is available with GPM or LPM calibrations.
B2X-18V VEHICLE MOUNT VERTICAL DRIVE
Category: Waterax
MID-RANGE 2-STAGE FIRE PUMP
Designed for OEM Fire Apparatus Manufacturers who need a vehicle mounted pump the WATERAX B2X is a versatile Mid-Range portable pump that delivers the best performance of its class with minimal operating costs. Unlike other pumps, the B2X uses a low maintenance drive belt system that provides efficient and dependable performance. The WATERAX B2X-18 pump pairs a reliable high performance Mid-Range 2-stage pump end with Briggs & Stratton 4-stroke 18 hp engine to achieve pressures of up to 190 PSI (13.1 BAR) and flow rates reaching 300 GPM (1136 L/Min). A strong show of both pressure and volume makes it the ideal pump for vehicle mounted applications dedicated to municipal and wildland urban interface operations. Manufactured by WATERAXB2X-D902 VEHICLE MOUNT
Category: Waterax
The WATERAX B2X-D902 pump pairs a reliable high performance Mid-Range 2-stage centrifugal pump end with a powerful Kubota D902-E4B 3-Cylinder Fuel Injected Liquid Cooled 25 HP Diesel Engine to achieve pressures of up to : 180 PSI (12.4 bar) and flow rates reaching 310 GPM (1173 lpm). A strong show of both pressure and volume makes it the ideal pump for vehicle mounted applications dedicated to municipal and wildland urban interface operations. Manufactured by WATERAXBB-4 ® SERIES
Category: Waterax
The WATERAX BB-4 ® Series is a full line of high pressure centrifugal pumps that has been used by forest agencies for over 40 years. It has become the weapon of choice in wildland operations. The BB-4 ® comes in portable & vehicle mounted configurations and is powered by Briggs & Stratton Vanguard 18HP and 23HP or Honda 21HP 4-stroke engines to achieve pressures up to 440 PSI (30.3 BAR) and flow rates reaching 106 US GPM. All BB-4 ® models feature a unique greaseless sealed bearing and a blister-resistant mechanical rotary seal. These latest improvements significantly reduce field maintenance and prolong pump end longevity.Manufactured by WATERAXBB-4 ® SERIES Portable Water Pump
Category: Waterax
The Wildfire model BB-4® portable fire pump is an ideal unit for high volume remote watering, brush truck and slip-on fire fighting systems in forestry and rural fire environments. High pressure up to 425 PSI (2930 kPa) is provided to operate very long hose lays and overcome pressure losses due to large elevation changes often encountered in rugged wildland fire operations. The higher power makes it ideal for pumping at high altitudes. A unique feature of the BB-4® pump is the quick release pump end that is inter-changeable with our Mark-3® pump. This standardization allows for in-field pump end exchanges eliminating long equipment down time and greatly reduces the inventory of parts at equipment service shops.BB-4-21 High-Pressure Fire Pump
Category: Waterax
HIGH PRESSURE 4-STAGE FIRE PUMP
The WATERAX BB-4 -21 pump pairs a reliable high performance 4-stage pump end with a powerful Honda 4-stroke 21 HP engine to achieve pressures of up to 440 PSI (30.3 BAR) and flow rates reaching 106 GPM (401 L/Min). Strong enough to operate as a source pump for tandem and parallel pumping, it is also optimal for direct attack firefighting, remote watering, sprinkler systems, and is a popular choice for slip-on units. For more information read this data sheetBB-4-23V VEHICLE MOUNT VERTICAL DRIVE
Category: Waterax
HIGH PRESSURE 4-STAGE FIRE PUMP
The WATERAX BB-4 -23 pump pairs a reliable high performance 4-stage pump end with a powerful Briggs & Stratton 4-stroke 23 HP engine to achieve pressures of up to 440 PSI (30.3 BAR) and flow rates reaching 106 GPM (401 L/Min). Strong enough to operate as a source pump for tandem and parallel pumping, it is also optimal for direct attack firefighting, remote watering, sprinkler systems, and is a popular choice for slip-on units.BB-4®-18V High-Pressure Fire Pump
Category: Waterax
The WATERAX BB-4 -18 pump pairs a reliable high performance 4-stage pump end with a powerful Briggs & Stratton 4-stroke 18 HP engine to achieve pressures of up to 440 PSI (30.3 BAR) and flow rates reaching 104 GPM (394 L/Min). Strong enough to operate as a source pump for tandem and parallel pumping, it is also optimal for direct attack firefighting, remote watering, sprinkler systems, and is a popular choice for slip-on units. Manufactured by WATERAXHigh pressure components
Category: Waterax
ID. KIT ITEM NO. 1 STR3-13V HIGH-PRESS FIRE PUMP 3-STG HON GX390 100047 2 DVK DRAIN VALVE KIT 250282 3 CHCKVLV MNFLD-15 FOR HIGH PRESSURE PUMPS 250265 4 GZPRIMERKIT GZ HND PRMR W/PLUMBING 250237 5 FOAMKIT SCOTTY EDUCTOR W/ BRACKET & PLUMBING 250266 6 MCP MINI CTRL PNL W/FW CONN 250234 Mid-range components
Category: Waterax
ID. KIT ITEM NO. 1 B2X-23V MID-RANGE FIRE PUMP, 2-STG, B&S23 100072 2 DVK-B2X DRAIN VALVE KIT FOR B2X 250269 3 VIC-3020 VICTAULIC GROOVED COUPLING 3 TO 2” GALV 8 0110 0 4 TWR MNFLD-1515 MANIFOLD DUAL 1.5" DISCHARGE 701152 5 FOAMCPKIT SCOTTY EDUCTOR AND FOAM PRO W/HARDWARE 250267 6 WCP-FW WATERAX CONTROL PANEL FOAM+WATER 250236 MINI – STRIKER ® SERIES
Category: Waterax
This pump unit is designed for use in some of the latest fire control techniques where small lightweight equipment is demanded. This pump is powered by a small and lightweight 4-stroke engine that meets the current emissions standards of the US EPA and CARB regulations. The Mini-Striker® unit works well for other applications such as marine services, irrigation and the application of foam and other fire chemicals.STRIKER TM SERIES
Category: Waterax
The WATERAX STRIKER TM Series is a full line of high pressure pumps powered by Honda 4-stroke engines. This series delivers high pressure ranging from 230 PSI (15.9 BAR) up to 345 PSI (23.8 BAR) and flows water up to 105 US GPM (397 L/Min). The STRIKERS are ideal pumps for firefighting, water transfer over long distance and high elevation, sprinkler system supply and snow making.ULTRA-STRIKER® Portable 3-Stage Fire Pump
Category: Waterax
The Ultra-Striker ® is a very versatile and compact unit. Capable of providing high-pressure nozzle streams for direct attack or volume flow 102 US gals/min (387 L / min) for water delivery at lower pressure. The Ultra-Striker ® is a portable unit, which can be used on a slip-on. This unit provides many interchangeable parts with the Mark 3®, BB-4® and other Striker pumps. It can be used by itself, in tandem or in parallel with other Wildfire pumps. This engine meets the current emissions standards of the US EPA and CARB regulations.