Call Us Email Us Whatsapp Us

Hale

Hale Products produces far more than fire pumps, and we have never lost our commitment to unmatched quality and superior performance. They has grown through new product innovation and strategic acquisitions to offer fire fighting modules, engine controls, governors, valves, pressure gauges, ES-Key multiplexing systems  and a wide range of engine-driven portable water pumps. With all our products 100% assembled in the United States, Hale Products is a proud partner for fire and rescue crews around the world.

Showing 1–12 of 30 results

  • Class1 Pro-Kit

    Categories: , ,

    The Hale/Class1 Pro-Kit™ program is designed to provide the professional fire-rescue vehicle manufacturer with an advanced method of configuring, ordering, and installing Hale/Class1’s state-of- the-art portable pumps.
  • Fyr Flote

    Categories: , , ,

    Portable Floating Pump

    The Fyr Flote is a lightweight, portable centrifugal fire fighting pump mounted on an unsinkable, high-strength polyethylene float.
  • Fyr Pak-E portable centrifugal pump

    Categories: , , ,

    The Fyr Pak-E is a lightweight portable centrifugal pump mounted on a padded adjustable backpack frame. Weighing only 44 pounds, the Fyr Pak-E can pump water from draft, relay or hydrant. It can go where a fire engine can’t reach. It will deliver discharge pressures up to 220 PSI (15.5 bar) and flows to 75 GPM (285 LPM) from draft. The unit includes an electric starting system, battery charging system, battery, recoil starter, spark arresting muffler, an engine overspeed control switch, a priming pump, and a priming valve.
  • GODIVA Fyr Pak

    Categories: , ,

    Portable Backpack Pump

    The Fyr Pak is a lightweight portable centrifugal pump mounted on a padded adjustable backpack frame. Weighing only 34 pounds, the Fyr Pak can pump water from draft, relay or hydrant. It will deliver discharge pressures up to 220 PSI(15.5 bar) and flows to 75 GPM (285 LPM) from draft. The unit includes an automatic recoil starter, a spark resisting muffler, an engine overspeed control switch, a priming pump, and a priming valve. Manufactured by GODIVA 
  • HALE 20FP-C8 FYR-PORT

    Categories: , , , ,

    Portable Pump

    The Fyr Port series portable pumps are specially designed for applications involving high pressure. Standard features include brass piston type hand primer, recoil starting, and a 8-horsepower two-cycle engine which offers high horsepower in a small pack-age. Two different mounting options are available — skid (20FP-C8SK) or wraparound frame (20FPC8FR). The complete pumping unit weighs in at a mere 50 pounds — ideal for one-man portability.
  • HALE Super Chief floating pump

    Categories: ,

    Hale's Super Chief has a unique design specially engineered for the fire service. The pump and engine assembly detach easily from the float. The float folds in half for convenient storage in most apparatus compartments. The Super Chief is the pump to count on when you cannot count on hydrants. It is easily used with alternative water sources such as streams, lakes, ponds, or pools. The Super Chief requires only three inches of water to draft. Manufactured by HALE
  • HP200 11 Series Pumps

    Categories: , ,

    B11 Briggs & Stratton Engines

    150 GPM @ 25 PSI . 105 GPM @ 50 PSI . 25 GPM @ 100 PSI The HPX200-B11 and HPT200-B11 portable pumps have been developed especially for the demands of firefighting situations. Pump performance and light weight make these pumps ideal for truck mount applications or as a versatile portable pump The HP200-B11 series comes complete with a 12-volt electric start integral system. The on-board fuel tank provides 3.2 quarts of fuel with shut-off valve. The HPX200-B11 is an ideal product for OEM installation. The suction connection has a 3” FNPT, 4” VIC combination intake connection and the discharge is a 2.5” FNPT connection for maximum efficiency in OEM or field installation. The pump has a standard engine mounted throttle and choke. The HPT200-B11 is equipped with carrying handles, mounted battery, mounted hand primer, 2.5” Male NH discharge swivel valve, mounted control panel, 2.5” Male NH intake connection. Power is provided by the respected Briggs Intek Series 15.50 ft. lbs torque engine featuring an aluminum cylinder with cast iron sleeve for long life. A Magnetron® electronic ignition along with float free carburetor for quick, dependable starting and Run Sense Oil System to prevent engine failure due to insufficient lubrication are standard features. It has an electric start with recoil backup and 10 AMP altenator to ensure starting under all conditions. A bronze enclosed impeller, bronze clearance rings and a self-adjusting, self-lubricating mechanical seal provide long life and low maintenance operation. Every detail and feature of the HP200-B11 series pumps have been carefully designed and built for years of operation.

    Product Specifications

    ProductLengthWidthHeightWeight
    HPT20029 1/2”23.1/42 ”20”129 lbs
    HPX200201/4"18"20"104 lbs

    Features and Benefits:

    • Pressure capabilities up to 100 PSI
    • Configured for easy installation by truck builders
    • Convenient starting with recoil or push button electric start
    • USFS style hand Primer
    • Superior Performance — High pump efficiency
    • Briggs & Stratton Engine — Gasoline powered, dependable, easy to start
    • Compact, lightweight design — High horsepower/weight ratio
  • HP200 YD9 DIESEL FIRE FIGHTING PUMP

    Categories: , ,

    The HPX200-YD9 diesel fire fighting pump is an ideal product for forestry or high pressure applications. It is provided with a Hale Guzzler Hand Primer that easily primes the pump in 4 to 8 strokes for most applications. The pump is equipped for remotely connected throttle and stop controls.
  • HP275 Attack Max

    Categories: , , ,

    The Attack Max is a twin handline capable pump. It is conveniently designed for easy installation by truck builders. Power is provided by the respected Briggs and Stratton Vanguard engine.
  • HP300 Series Pumps

    Categories: , ,

    HP300 Series pumps come in a number of variations to suit your needs and situation. Designed for easy installation by truck builders.
  • HP400-B18 Series pump

    Categories: , ,

    The HP400 Series is a low pressure, high volume portable pump. The pump body and head are coupled together with a stainless steel bank clamp which allows for quick pump removal for servicing.
  • HP400-B18 Series Pumps

    Categories: , ,

    The HP400 Series is a low pressure, high volume portable pump. The pump body and head are coupled together with a stainless steel bank clamp which allows for quick pump removal for servicing.
0
    0
    Your Cart
    Your cart is emptyReturn to Shop